Capture One

Applying and managing LUTs in Capture One Pro

You are here:

How do I install Lutify.me LUTs into Capture One Pro Styles and Presets tool?

Introduction The installation procedure of Lutify.me LUTs into Capture One software depends on the operating system you are using. Please follow the instructions relevant to your operating system. Mac Step 1Close Capture One if it is open.Step 2Open your Lutify.me package and browse t...

How do I apply LUTs in Capture One?

Introduction Applying Lutify.me LUTs in Capture One is a simple matter of applying a style under Styles and Presets tab. Please follow these steps to apply a LUT in Capture One. Applying LUTs in Capture One Pro Step 1Make sure Lutify.me LUTs are installed in Capture One. If you still haven't ...

How do I apply LUTs in Capture One during a tethered session?

Introduction Tethered sessions allow you to connect your digital camera with Capture One software for direct image capturing into the software. Tethered sessions are fully supported by our LUTs. Solution Please follow these steps to use LUTs in a tethered session.Step 1Connect your camera...

How can I apply more than one LUT (stack LUTs) in Capture One?

Unlike traditional styles in Capture One which include a set of image control changes such as curves, exposure, contrast, etc which can be stacked our LUTs are applied as ICC color profiles.As it's impossible to apply more than one ICC profile to an image in Capture One, it's impossible to apply...

What can I do with Lutify.me LUTs in Capture One Pro?

All current workflows supported by Capture One can be used with our LUTs. For example, the LUTs can be used during import, applied on large batches of images or used for tethered shooting. Your images remain fully editable and you can base your final grade off of our LUTs.

Which versions of Capture One are supported?

The following versions of Capture One are supported and can be used with our LUTs:Capture One 11 Pro - Full support (LUTs can be applied to base layer only as Capture One doesn't allow application of 3D ICC profile to a layer. Due to this we offer all of the LUTs in 25%, 50%, 75% and 100% stre...

Applying a LUT on an image in Capture One appears to have no effect

Capture One cannot apply a LUT on images of very small dimensions. That behaviour is by default. Make sure you are applying your LUTs on images of at least HD resolution (1920x1080 pixels).

List of known issues when using LUTs in Capture One

Introduction This document details a list of known issues when using Lutify.me LUTs in Capture One. This document will be updated as we become aware of any additional issues. Missing ICC Profile error removing a style in Capture One 9 ProblemAfter applying a style in Capture One 9 and than re...
Close
Go top