List of known issues when using LUTs in Capture One

This document details a list of known issues when using Lutify.me LUTs in Capture One. This document will be updated as we become aware of any additional issues. Missing ICC Profile error removing a style in Capture One 9 Problem After applying a style in Capture One 9 and than removing it under Styles and […]

Read more Like this post0

How can I apply more than one LUT (stack LUTs) in Capture One?

Unlike traditional styles in Capture One which include a set of image control changes such as curves, exposure, contrast, etc which can be stacked our LUTs are applied as ICC color profiles. As it’s impossible to apply more than one ICC profile to an image in Capture One, it’s impossible to apply more than one […]

Read more Like this post0

How do I apply LUTs in Capture One during a tethered session

Please follow these steps to use LUTs in a tethered session. Step 1 Connect your camera as you normally would. Step 2 Once your camera is connected go to Capture tab. Step 3 Shoot the first image. Adjust white balance, contrast, exposure, etc. Step 4 In the Capture tab, under Next Capture Adjustments select the […]

Read more Like this post0

Which versions of Capture One are supported?

The following versions of Capture One are supported and can be used with our LUTs: Capture One 11 Pro – Full support (LUTs can be applied to base layer only as Capture One doesn’t allow application of 3D ICC profile to a layer. Due to this we offer all of the LUTs in 25%, 50%, […]

Read more Like this post0

What can I do with Lutify.me LUTs in Capture One Pro

All current workflows supported by Capture One can be used with our LUTs. For example, the LUTs can be used during import, applied on large batches of images or used for tethered shooting. Your images remain fully editable and you can base your final grade off of our LUTs.

Read more Like this post0

How to install Lutify.me LUTs into Capture One Pro Styles and Presets tool

The installation procedure of Lutify.me LUTs into Capture One software depends on the operating system you are using. Please follow the instructions relevant to your operating system. Mac Step 1 Close Capture One if it is open. Step 2 Open your Lutify.me package and browse to the Capture One Styles > Mac folder Step 3 […]

Read more Like this post0

How do I apply LUTs in Capture One?

Applying Lutify.me LUTs in Capture One is a simple matter of applying a style under Styles and Presets tab. Please follow these steps to apply a LUT in Capture One. Step 1 Make sure Lutify.me LUTs are installed in Capture One. If you still haven’t installed the LUTs, please follow the instructions in this document […]

Read more Like this post0

Applying a LUT on an image in Capture One appears to have no effect

Capture One cannot apply a LUT on images of very small dimensions. That behavior is by default. Make sure you are applying your LUTs on images of at least HD resolution (1920×1080 pixels).

Read more Like this post0
Close
Go top